Cabinets

Surface heating and cooling manifolds should be mounted in special installation cabinets which are available in three basic versions: surface-mounted, flush-mounted and covered with glaze.

The design of installation cabinets for surface heating and cooling enables the assembly of manifolds with and without a mixing system. The cabinets also provide space for the electrical strips. Electrical strips are fitted with screws to a specially prepared holes on the mounting rail at the top of the cabinet.
Fast selection of cabinets, depending on the type of manifold, basic equipment and how connection method is presented in the table below:

Type of cabinet	Code	Height [mm]	Width [mm]	Depth [mm]	Number of circuits
Type of cabinet	Code	Height [mm]	Width [mm]	Depth [mm]	OP manifold	manifold OP+Set-P/Set -K	OP manifold with mixing system
SWN-OP-10/3	1100-OP	710	580	140	2-10	2-7/2-6	2-3
SWN-OP-11/7	1110-OP	710	780	140	11-13	8-11/7-10	4-7
SWN-OP-15/10	1120-OP	710	930	140	14-15	12-14/11-13	8-10
SWPG-OP-10/3	1300G-OP	710	580	110-165	2-10	2-7/2-6	2-3
SWPG-OP-11/7	1310G-OP	710	780	110-165	11-13	8-11/7-10	4-7
SWPG-OP-15/10	1320G-OP	710	930	110-165	14-15	12-14/11-13	8-10
SWP-OP-10/3	1300-OP	750-850	580	110-165	2-10	2-7/2-6	2-3
SWP-OP-11/7	1310-OP	750-850	780	110-165	11-13	8-11/7-10	4-7
SWP-OP-15/10	1320-OP	750-850	930	110-165	14-15	12-14/11-13	8-10