KAN-therm: Pipes
Main image. Main image. Main image. Main image. Main image.


Pipes

System KAN-therm Copper is designed to work with copper pipes within diameter range 12–108 mm. Pipes must meet specific requirements and feature adequate properties:

  • Copper pipes according to EN 1057 R220/R250/R290
Copper pipes approved for use with the System KAN-therm Copper

Ø [mm] Wall thickness [mm]
0,6 0,7 0,9 1,0 1,1 1,2 1,5 2,0 2,5
12 R250 R220
15 R250 R220
R250
R290
18 R250
R290
22 R250 R250
R290		 R220
28 R250 R290 R250 R290
35 R290 R250
R290		 R290
42 R290 R250
R290		 R290
54 R290 R250
R290		 R290
66,7 R250
R290		 R290
76,1 R250
R290		 R290
88,9 R290
108 R250
R290		 R290


Values in the table refer to tensile strength (220, 250 and 290 N/mm2). A distinction is made between soft, medium-hard and hard alloy pipes — R220, R250 and R290, respectively. The higher the value, the harder the pipe material is.